There are a lot of things you’re free to do with plastic bottles.
All you need is just a little bit of creativity!
Here are 8 plastic bottle life hacks byMORENA DIY.
Image by MORENA DIY via Youtube
Trace the circle and cut it.
Add glue to the edges of the plastic bottle and attach the foam.
Trim off the excess and cut a short line in the middle using a blade.
Wrap them with tape, then add another layer of plastic bottles and tape them to secure.
Cut two circles from the plywood, the same size as the diameter of the taped plastic bottles.
Mark in the center and 5 points around it.
Drill the screws on the points, then repeat on the other side.
Step 2:
Wrap the polyester wadding around and sew the ends together.
Staple the bottom ends to the wood.
Fill the top with filler and kill the wadding.
Next, make the cover using the polyester lining fabric, then staple the bottom to secure it.
Candle holder
Cut the top part of two plastic bottles.
ensure the caps are closed.
Glue them together on the caps, then insert the candle on one end.
Sponge holder
Cut the top and bottom parts of a plastic bottle.
Insert the top to the bottom and use it to hold your sponge.
Potato basket
Cut a small hole on one side and insert the potatoes.
DIY tape dispenser
Cut the top part of the plastic bottle and remove the cap.
Cut a small piece of the edge of the knife and glue it on the top of the bottle.
check that that its overlapping and that the bristles are pointing outward.
Insert the end of the tape into the bottle.
To keep it from moving, insert a popsicle stick into the tape.
Screw or nail container
Cut the top part of the bottle.
Cut the balloon in the middle then insert it on the plastic bottle.
3D hologram
Cut the cap and bottom part of the bottle, leaving just the cone shape.
Fold it in the middle two times to make 4 four corners.
Place it right side down on your cellphone.
