Looking for a new water feature for your garden?
If you do, I have found the perfect project that will surely impress everyone!
This DIY floating fountain byGaleri Saturasiis an eye-catching water fountain that lights up when switched on.
Image by Galeri Saturasi via YouTube
I know you might be thinking, Where is the water coming from?.
Well, its magic.
With some pipe and hose, you could achieve this floating effect.
Kids will surely be impressed.
Let me explain how it works.
The basin is filled with water.
It uses the same water throughout.
Its amazing, right?
It looks absolutely beautiful at night when its glowing.
This fountain definitely gives that magical feeling.
Remove the tip of the faucet and cut the tube on the bottom.
Make a bigger hole, so it fits the aquarium pipe perfectly.
Cut 4 small indention in each side, then insert the aquarium pipe.
Step 2:
Drill a hole the size of the hose on the valve socket.
Insert the valve socket into the other side of the pipe.
Insert the hose inside the pipe through the hole on the valve socket.
Seal the gaps between the socket, pipe, and hose using rubber sealant.
Step 3:
Sand the basin and spray paint in black.
Insert the eagle eye.
Cut a small hole on the valve socket for the cord.
Then seal the valve with the other circle of PVC sheet.
Use instant glue to stick in place and rubber sealant to seal the gaps.
Cut the excess hose.
Seal with rubber sealant.
Step 7:
Attach the pump to the hose.
Glue them on the basin.
Make a hole on the basin for the cord.
Place the bottom of the paint bucket on the pipe right side down.
Step 8:
Assemble back the faucet.
Fill the basin with some water, then add stones.
Attach the faucet to the other side of the pipe.
