This garden bed byJesse does DIYis easier to make than you think!
Anyone can do this simple project.
This will definitely upgrade the look of your garden.
Image by Jesse does DIY via Youtube
Watch the video below for full instructions.
Add some topsoil, then dug a small trench around.
Next, add some rock to the trench as a base .
Tamp it down to see to it its leveled.
Step 2:
Add the four-by-fours on the top of the rocks.
These will be the baseboards.
check that that one is longer than the others so that later on you could stagger the joints.
Double-look to see if they are leveled by using a level ruler.
Cut the last board to the final length.
Step 3:
Add construction adhesive to the four-by-fours.
Also, pull the two four-by-fours apart and add a little bit of glue into the end joints.
When you put the four-by-sours on top, work it back and forth.
Screw five or six-inch screws onto the wood.
These will act as mechanical anchors until the glue dries.
Do the same for the short side.
ensure to score on the cross-sectional area on the corner too.
double-check they are equally spaced.
Screw them in place.
Place them on top of your order to check that it has the correct measurements.
Add construction adhesive and glue it in place.
Be sure to also add glue to the joints.
Screw them on top.
