Warmer weather is almost here, and its time to enjoy the sun!
Luckily, I found this DIY hanging outdoor chair byHGTV Handmade!
Its perfect for my backyard.
Image by HGTV Handmade via Youtube
I cant wait to finish it so I can sit on it while drinking my coffee in the morning.
If you want to make this for your home, keep on reading or watch the video below.
Step 3:
Drill 5/8 holes through the 2 marks on each of the dowels.
Repeat on the 3.5 marks but change them into 1/2 holes.
Step 4:
On the third 1.25 dowel, measure out and drill only the 3.5 holes.
Step 5:
Get the outdoor fabric and cut a 48 by 23 rectangle.
Fold 1/2 of fabric along the long sides and iron in place.
Fold again and iron.
Repeat it for the other side.
Straight stitch twice along both of the folds.
Next, put the 5/8 dowels into the holes.
Step 8:
Drill a pilot hole where the dowels come together and screw them.
Step 9:
Tie a double knot in your rope leaving about 4 on one side.
Feed the other long side up through the other 1.25 dowel.
Next, feed it through the hole on the other end.
Make another knot under the dowel.
Leave enough rope on top to make a loop.
Tie a loop into the rope and measure so its directly above the center of the dowel.
Step 11:
Get the leftover rope and cut it into two equal sizes.
Fray the ends then hang on a hook that supports at least 300 lbs.
