Say goodbye to a muddy pit and hello to a new DIY pathway with drainage.
Dont worry its not that hard to build!
With the right tools, your work can be done easily and quickly.
Image by NextJeneration via Youtube
Watch the video below for full instructions.
Adjust spacing based on your preference and take down the measurements.
For this project, the pathway is 42 by 21 and 5 deep.
The size of the pavers is 24.
The distance on each side is 9, while the distance between each one is 6.
Step 2:
Mark the perimeter with rope.
Use a sod cutter to remove 2 of the sod, roll them and place them on a bag.
Step 3:
Lay the weed barrier, then put 2 inches of gravel for the drainage.
Spread it around using a leveling rake.
Step 4:
Spray the gravel with the hose, then tamp it away until its compact.
Step 5:
Add the edging using a hammer.
Step 7:
Lay the pavers one by one.
Measure out 6 between each one.
Use a rope to get a nice straight line as a reference.
Make some adjustments if needed.
Step 8:
Add the smaller grade of limestones and spread it evenly.
Use a smaller tamper to compact the gravel.
