Do you have a messy garage?
Do you need more storage space for your things?
This garage shelving is the solution to your problems!
Image by Ana White via Youtube
Its easy, cheap, and fast to make.
Build this simple project with the help of this tutorial byAna White.
Use a level to verify that the board is leveled.
Use the three-inch screws to screw them into the studs.
Step 3:
Take an additional 24 and screw it to the first set.
Leave the screws protruding out a little bit because youll be removing the screws later on.
Repeat for the other two.
You just need two screws to hold these boards in place.
Do on the other end.
If you have a long span, place a third or fourth leg in the center for additional support.
see to it to screw them properly.
Step 5:
Remove the screws that attach the second set of 2x4s to the first set.
Remove the second layer with the legs.
Now you have a perfectly matched second leg for the shelving.
Step 6:
Use Kreg jig to attach cleats to the first set of 2x4s.
Take the full leg set and attach it to the cleats.
You wont need a lot of screws for this.
you’re able to also use a smaller screw for this step.
