You only need jelly rolls or 2 1/2-inch strips of precut fabric for this project!
Watch the video below for full instructions.
To make the cutting process faster, stack 2 strips and then line them up.
Image by Missouri Star via Youtube
Take your ruler, cut the salvage edges, and cut them into squares.
Step 2:
Get one square and a solid color strip.
Place them right sides together and sew a quarter of an inch seam allowance.
you’re able to sew as many squares as the strip will allow.
Repeat on the bottom with 3 more pieces of strip units.
ensure not to overlap each one.
After that, cut them apart again and press them with an iron to make blocks.
Take another 2 1/2 square and sew it on the other side diagonally.
Step 6:
Trim off the outside corners of the block and press with an iron.
Sew a background strip on the side of half triangle square, cut the excess, and press.
Do the same on the other side.
Trim the excess corners and press.
Now, you have a bear paw block.
Make 3 more blocks to make the big block.
For the outer edge, sew the left 2 1/2 squares together.
